[Product name] : car air pump

【 Product brand 】 : suitu /suitu

【 Product model 】 :

[ST-5002] Vehicle air pump - basic model pointer

[ST-5002] Vehicle air pump - basic digital display model

[Product size] : about 14.5*6*20.5cm

【 Material 】 : ABS

[Product weight] : Gross weight (about) 800g

[Length of power cord] : about 300cm The length of the trachea is about 50cm

【 Packaging 】 : 220*158*88mm

【 Output power 】 : 120 (W)

[Rated voltage] : DC12 (V)

【 Light 】 : LED

[Outer box size] : 42.5x32.5x44.5(H)cm

[Outer box load] : 20pcs/ctn

【 Product Features 】 :

1, this machine is suitable for 12V car tires,
2Also suitable for motorcycles, bicycles, ball games, rubber boats, beach floating beds, inflatable toys and so on.
3On the highway, in the field or in the morning to work, the tire suddenly leaks or tires are injected, which can play a more first-aid role.
4Car tires to maintain the correct tire pressure, can ensure driving safety, and save gasoline, with the car, in case of emergency, infinite use.
5It is equipped with a set of inflatable nozzle, which can be used for inflating tires, rubber boats, air cushions, inflatable toys, balls and many other uses.

【 Instruction 】 :

1, the rubber tube head of the air nozzle directly inserted in the tire valve, hear the sound of air leakage from the tire, indicating that the air has been circulated, continue to tighten the air nozzle, at this time the air is no longer leaking out.
2, insert into DC12V cigarette lighter
3When inflating, the instrument pointer rises with the degree of tire saturation, when the pointer reaches the appropriate tire pressure (the general tire pressure of car tires is 223kpa=35PSI), remove the plug and air nozzle, that is, the work is completed.
4Please use the professional ball needle and plastic connector equipped with this machine to connect with the air nozzle to inflate the ball and other pneumatic equipment.

[Note] :
1Can not be used in large and overweight vehicle tire inflation, such as trucks, large trucks, container trucks, etc.;
2When used, please start the car engine to enhance the power, do not consume the car battery power;
3The machine is limited to DC (DC12V) power supply, and cannot use household high-voltage AC (AC220V) power supply;
4When inflating, please stop for 10 minutes after continuous work for 10 minutes for cooling, to prevent damage to the air pump and accessories, and to extend the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5When the general tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, and the large tire will take a little longer; If the pointer of the instrument rises rapidly to 50-100psi when it starts to inflate, it means that the air is blocked and the air does not enter the tire, at this time, the air nozzle joint needs to be removed immediately and re-operated, otherwise the motor and the instrument are easy to damage.
6When using, do not leave the body, always pay attention to the tire pressure, not too supersaturated;
7After the use of the machine, the air nozzle wrench must be straightened to avoid rubber elastic fatigue;
8The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A);
9The machine should avoid moisture, heavy fall and sand intrusion, to avoid children playing, so as not to be damaged;
10The pressure required for each type of tire is different, please refer to the sign on the side of the car tire, or ask the car manufacturer